X300 DP Plus OBDSTAR Full C Package with 2 Year Free Update

X300 DP Plus OBDSTAR Specs:

Manufacturer: OBDSTAR

Condition: New

OBDSTAR_X300_DP_Plus_C_Package_Full_Configuration

Why buy X300 DP Plus from us?

Online Technical service. We provide instant online technical service, for any questions, you can feel free to WhatsApp us or send us an email, or just click an online chat on our website. We have a professional engineer team to answer your question and fix your problem.

It is a full version X300 DP PLUS: Immobilizer + Mileage correction/Odometer Adjustment + Diagnosis + Special function (Oil reset +ABS + Battery matching + ECU programming + EPB + Throttle programming + Airbag rest + TPMS + Steering angle reset + OBDII + DPF + Injector code + Suspension matching + Gear learning + CVT learning + EEPROM + Key renewing + ECU cloning) Adapter (P001 programmer + C001 circuit board + C002 circuit board + W001 data cable + W002 data cable + W003 data cable + Toyota smart key Emulator) + Ignition coil + Remote tester.

What do I need to pay attention to before buying X300 DP Plus?

Please register first after receiving the product. OBDSTAR Distributor code: 0086A001

X300 DP PLUS Registration and Upgrade Guide

X300 DP Plus supports English only

It doesn't support the following car models: DAIHATSU/ PROTON/ MAHINDRA/ MARUTI/ TATA/ HOLDEN/ LADA/ PERODUA/ IRAN. (Please contact local dealers from your area to get authorization)

Please check the supported car list of vehicle functions on the official website before you buy this device. If you are not sure whether the function or vehicle is supported, please feel free to inquiry us online.

One-year free update online, after that, 500USD for a one-year update subscription.

X300 DP Plus C Full Configuration Diagnostic Function:

Diagnose the electronic control system of prevailing vehicle models covering Asian, European, American and Chinese. Diagnosis functions include: Read DTCS, Clear DTCS, Read data stream, Special functions etc.

Classify special function: ABS, EEPROM Adapter, Battery match, CVT learning, EPB, Gear learning, Immobilizer, TPMS (low tire) reset, Cluster calibrate, ECU programming, steering angle reset.

Specially designed for Android platform with clear and user-friendly interface.

X300 DP Plus C Full Configuration Software Advantages:

1: ECU Clone

ECU Clone, means ECU duplication.

The device copies all the data from the original vehicle ECU, and then writes all data copied into ECU with the same hardware to realize the same ECU function with the original vehicle.

2.Clone directly when replacing a new or a used ECU

Without online matching in the 4S store or removal of ECU bonding wire for reading and writing! Directly write without dismantling OBD!

3.Three features for ECU Clone:

Free of 4S online: break monopoly from 4S, benefiting automobile maintenance industry

Simplified operation procedures: realize foolproof operation

Non-dismantling with zero risks: read and write data without dismantling ECU

X300_DP_Plus_Three_features_for_ECU_Clone

Switch activation function:

(Today many instruments or audio of vehicles activate secondary power supply to go into power-on status by relevant module CAN communication on the vehicle, but sometimes an instrument or an audio is separated from vehicle CAN BUS network, causing startup failure when it needs to be repaired by an auto technician. This function can simulate CAN communication to activate secondary power supply, so the instrument or the audio enters into power-on status. In this way, it not only can test and verify the instrument or the audio, but also save an enormous cost for an auto technician to purchase a large number of startup platforms of various vehicles and wiring harnesses!)

X300_DP_Plus_Switch_activation_function

Add “Help “functions:

Contain built-in testable vehicle models, upgrade announcement, features, help notes and wiring diagrams, etc.

Car list: directly get it on the device

Upgrade Announcement: all details are available on the device

Customers can look up the features or uniquely support functions on the device

Help notes: built-in help notes for each model or function

Wiring diagrams: built-in ECU wiring diagrams, more intuitionistic and convenient

OBDSTAR X300 DP Plus C Full Configuration Hardware Advantages:

Built-in VCI box, communication more stable

8-inch touchscreen, more intuitionistic

Can be charged directly via OBD interface

Practical and high-end gift box

Industrial design with silicone case

Back bracket design: Can propone the steering wheel or stand on the table, easier to operate

With simulated key 1 applies to the vehicle with 94/D4 type of smart key.

3 in 1 P001 programmer: combined with EEPROM adapter + RFID adapter+ Key Renew adapter

Add the clip of reading SOP 8PIN EEPROM

Add wiring harness of ECU reading by OBD (for ECU cloning and switch activation)

Maintenance Database

Remote Assistant

One Key Upgrade

How to use OBDSTAR X300 DP Plus Induction Coil?

1. Functional Overview:

Induction Coil is used to detect the key induction coil failure of the vehicle.

How_to_use_OBDSTAR_X300_DP_Plus_Induction_Coil

2.Application Method:

Attach the Induction Coil to the key induction coil, and insert the key or turn ignition on, while Induction Coil red indicator lights up and goes out, indicating the key induction coil is good; the indicator does not illuminate to indicate the key coil is damaged, please check and repair or replace.

OBDSTAR X300 DP Plus A+B+C Full Configuration Technical Parameters

Operation system: Android 5.1.1

CPU: Exynos4418 Dual Core ARM Cortex A9 1.4GHz

Battery: 3700mA, rechargeable polymer lithium battery

Extension memory card: 32G Micro SD (TF) card supported

Memory capacity:1GB

Storage capacity: 32GB

LCD: 8.0 inch

LCD resolution: 1280*800

Touch screen: Capacitive touch screen

Camera: 5 mega rear-view camera

Wi-Fi: supported

Working temperature: -10℃ ~ 55℃14℉ ~ 131℉

Storage temperature: -20℃ ~ 70℃-4℉ ~ 158℉

Weight: about 1.0 Kg

Dimension: 254mm*174*mm*35mm

OBDSTAR_X300_DP_Plus_A+B+C_Full_Configuration_Technical_Parameters

Other Configuration:

A Package:

Immobilizer + Special function (EEPROM + Key Renewing) Adapter (P001 programmer+ C001circuit board + C002 circuit board + W001 cable + W002 data cable + W003 data cable + Toyota smart key Emulator) +others (Ignition coil + Remote tester)

B Package:

Immobilizer+Special function (EEPROM+Key Renewing) +Mileage correction+Adapter(P001 programmer+C001 circuit board+C002 circuit board+W001 data cable+W002 data cable+W003 data cable+Toyota smart key Emulator)+others(Ignition coil+Remote tester)