BitEdit Toyota Denso Petrol 1

Product Description:

Software Activation From BitSoftware with Product Number: MK22885

Specs:

Manufacturer: BitSoftware

Module Toyota Denso Petrol 1

Software module for editing calibrations Denso ECU of petrol Toyota | Lexus | Scion vehicles with petrol normal aspirated engines 1.0& 1.2& 1.3& 1.6& 1.8 with ECUs Denso 89661-xxxxx and MCU NEC 76F0038& 76F0039& 76F0040& 76F0070& 76F0085 inside.

Fuel: enrichment Mass air flow sensor pulsations map& Enrichment for engine protection correction on retardation& Enrichment at full load& AFR value as stoichiometry& Delay for enable closed loop& Coolant temperature to enable closed loop& Enrichment for engine protection correction for full load& Throttle position threshold to enter full load& Throttle position threshold to exit from full load& Enrichment for engine protection base& Per cylinder enrichment multiplier
Input sensors: Accelerator pedal sensor 1& Accelerator pedal sensor 2& Correction for mass air flow via Intake temperature& Mass air flow sensor conversion curve
Limiters: Engine speed limitation& Vehicle speed limitation
Spark advance: Spark advance base& Spark advance low octane& Spark advance high octane& Minimal spark advance& Maximal spark advance
Throttle valve control: Throttle valve position limitation low load& Throttle valve position limitation full load
Exhaust temperature model: Calculated exhaust temperature 1& Calculated exhaust temperature 2& Calculated exhaust temperature 3& Calculated exhaust temperature 4& Calculated exhaust temperature 5& Exhaust temperature offset for spark retardation& Minimal exhaust temperature for engine protection& Maximal exhaust temperature for engine protection& Exhaust temperature offset for vehicle speed
Spark advance: knock: Engine speed lower threshold for retardation& Engine speed upper threshold for retardation& Retardation recovery rate& Spark advance retardation amount
Startup: Startup Time& Startup engine speed adder
Warm up: Coolant temperature threshold for cold engine& Warm up correction for P/N& Warm up correction for drive/reverse
Fuel: injector control: Injection time correction factor by load& Minimal injection time& Injector flow constant& Injector dead time& Minimal injection time when fault is stored
Spark advance: corrections: Spark advance base correction by coolant temperature& Spark advance base correction by coolant temperature 2& Spark advance corrections high/low octane& Spark advance correction for VVT& Spark advance correction for VVT high octane
Idle speed: Idle speed at P/N& Idle speed in drive position
VVT: Intake camshaft position& Exhaust camshaft position& Intake camshaft position at low throttle& Intake camshaft position at high throttle& INtake camshaft position at full load& Exhaust camshaft position at low throttle& Exhaust camshaft position at high throttle& Exhaust camshaft position at full load
Spark advance: minimal: Spark advance correction via coolant temperature& Minimal spark advance& Coolant temperature threshold for minimal spark advance correction
Torque model: Optimal torque 2& Optimal torque
DTC

Supported engines:

Supported SW list for Module Toyota Denso Petrol 1