Autel MaxiPRO MP808TS Diagnostic Tool

Specs:

SPECS

Manufacturer: Autel

Condition: New

Provided Functionality

1. Comprehensive Diagnostic Functions

1). Exceptional OE-level system coverage for all electronic systems

2). Read/Erase Codes, Display Freeze Frame and Live Data, Perform Active/Actuation Tests and Adaptations

3). Auto VIN technology enables instant vehicle make, model and year identification

2. Full Systems Diagnoses In All Vehicle Systems on the ECUs

Autel MP808TS can access to ALL vehicle systems and subsystems, such as Body, Chassis, Powertrain, Network and etc., to perform a comprehensive scanning on ECUs to locate fault systems and retrieve DTCs.

1). To diagnose Brake System if you feel the brake pedal is mushy and notice unusual odor or noise, etc. A properly operating brake system is critical to ensure safe vehicle control and operation;

2). To diagnose Emission System if the system is affected by vehicle age or poor quality fuel. A good emission system reduces harmful gases to a large degree and protects you from being fined;

3). To diagnose Fuel system if vehicle won't start or "Check Engine" light is illuminated. Check car's fuel system regularly ensures the best performance of your car with the lowest emissions;

4). To diagnose Transmission if your car is slipping or difficult to shift. The system plays an important part in the overall performance of your car;

5). To diagnose Wiper System if you observe chattering or streaking wiper. If the car is not regularly checked, the accident might happen because you can’t see clearly;

6). To diagnose Light System if you see rapid signal blinking or dimming lights. And many more ...

3. Complete TPMS Services for Greater Security

MP808TS can be utilized to help you monitor the tire status including tire pressure and temperature and it is indispensable when you need to replace the bad sensors. In addition, it offers DTC description, so you can easily find out wrong places.

It is capable of improving your vehicles' safety. Details as the following:

1. Embedded antennae triggers /reads 98% of all known TPMS sensors

2. Diagnose ECU for complete TPMS health check with DTC description

3. Displays manufacturer-specific TPMS Relearn procedures and performs OBD2 Relearns

4. Programs MX-Sensor by 4 options to replace OEM sensors:

a) Copy by Activation – Program the sensor ID retrieved from activated sensor

b) Copy by Manual Input – Manually input the original sensor ID for programming

c) Auto Create – Create a random ID to program MX-Sensor

d) Copy by OBD – Program the sensor ID retrieved from TPMS ECU

5. Reads & clears DTCs from TPMS

6. Perform OBDII Relearn by writing sensor IDs into ECU for sensor recognition; Displays manufacturer-specific TPMS Relearn procedures.

7. TPMS by OEM Part No- this ideal method allows you to program up to 20 sensors at the same time.

4. Special Functions

1). Oil Reset Service to reset service mileage and service intervals for the Engine Oil Life system;

2). TPMS Service to look up the tire sensor IDs from ECU, as well as to perform TPMS programming and reset procedures after sensor replacements;

3). EPB Service to deactivate and activate the brake control system, assist with brake fluid control, open and close brake pads, and set brakes after disc or pad replacement, etc.;

4). ABS/ SRS Services to perform bi-directional tests to check the operating conditions of ABS and SRS, such as Automated Bleeding, Pump Motor Test, and checking Module information, etc.;

5). SAS Service to perform calibration for the Steering Angle Sensor, and clear fault memory;

6). DPF Regeneration Service to clear the blockage through the continuous burning of the particulate matter captured in the DPF filter

7). BMS Service performs a reset on the vehicle battery for clearing the fault information and re-match the battery;

8). Brake Bleed performs various bi-directional tests to check the operating conditions of Anti-lock Braking System (ABS), and turn off the warning light;

9). Injector Coding writes the new code to the ECU after replacement of injector, so that the injector works;

10). Throttle Adaptation initialize the throttle actuators to the default state for regulating throttle (or idle engine) operations accurately;

11). Tire Pressure Monitor System Reset (TPMS Programming Service): Quickly looks up the tire sensor IDs from the vehicle’s ECU, as well as to perform TPMS programming and reset procedures after tire sensors are replaced.

5. Active Test

During the actuation test, MP808TS outputs command to the ECU in order to drive the actuators, and then determines the integrity of the system or parts by reading the ECU data, or by monitoring the operation of the actuators, such as switching an injector between two operating states. (This option is used to access vehicle-specific subsystem and component tests. Available test varies by the vehicle manufacturer, year, and model.)

6. Other Supportive Features

1). Shop Manager feature keeps all data files, customer information, and vehicle records and history well organized on tablet

2). Cloud-based MaxiFix online community provides a vast database of diagnostic and repair tips and proven filed fixes

3). Automatic system and software updates with real-time Wi-Fi push notifications

4). Remote control technology enables support to quickly repair or update tool

5). One-stop multitasking is designed for ideal management of workshop operations to keep all data files, customer info, and vehicle records well organized.

Package includes:

1pc x USB Cable (for charging)

1pc x USB Cable (for test)

1pc x MaxiVCI Mini

1pc x USB External Power Adapter

1pc x User Manual

1pc x Quick Reference Guide

1pc x Carry case